Technical Information

Operating instructions / ขั้นตอนและคำแนะนำการใช้งาน

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at the workplace may differ from the "CE"-type tests.
• It is not recommended for persons sensitized to dithiocarbamates and thiazoles to use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Technical Customer Service - MAPA PROFESSIONNEL  in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their packaging at a temperature above 5° C.

Laundering conditions

Before taking off the gloves, clean them as appropriate :

• in use with paints, pigments and inks: wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc…): rub over with a dry cloth
• in use with acids or alkalies: thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : using the gloves or submitting them to another cleaning or laundering process can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before putting them on again.

Legislation

This product is not classified hazardous according to the regulation (EC) n°1272/2008 of the European Parliament and of the Council. This product does not contain more than 0.1 % of substance of very high concern (SVHC) or any substance included in the annex XVII of the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation / เอกสารแนบสำหรับประกอบการพิจารณา

Item Code

ID CODE : 02-6509