Technical Information

Operating instructions / ขั้นตอนและคำแนะนำการใช้งาน

Instructions for use

• It is recommended to check that the gloves are suitable for the intended use, because the conditions of use at workplace may differ from the “CE”-type tests.
• Persons sensitized to thiurames and thiazoles should not use these gloves.
• Put the gloves on dry, clean hands.
• Do not use the gloves in contact with a chemical for a duration in excess of the measured breakthrough time. Refer to the website www.mapa-pro.com or contact the Mapa Technical Customer Service - in order to know this breakthrough time. Use 2 pairs alternatively when in long duration contact with a solvent.
• Turn the cuff end down in order to prevent a hazardous chemical from dripping onto the arm.
• Inspect the gloves for cracks or snags before reusing them.

Storage conditions

Store the gloves in their original packaging protected from humidity, heat, at mini 5°C (41°F).

Laundering conditions

Before taking off the gloves, clean them as appropriate :

• in use with paints, pigments and inks : wipe with a clean cloth dampened with a suitable solvent, and rub over with a dry cloth
• in use with a solvent (diluents, etc…) : rub over with a dry cloth
• in use with acids and alkalies : thoroughly rinse the gloves under running water, and rub over with a dry cloth.

Caution : improper use of the gloves or submitting them to any cleaning or laundering process which is not specifically recommended can alter their performance levels.

Drying conditions

Ensure the inside of the gloves is dry before reusing them.

Legislation

• This product is not classified as hazardous according to the directive 1999/45/EC of the European Parliament and of the Council.

• This product does not contain any substances of very high concern according to the regulation n° 1907/2006 of the European Parliament and of the Council (REACH).

Documentation / เอกสารแนบสำหรับประกอบการพิจารณา

Item Code

ID CODE : 02-6536